Skip to content
Techtember

Always First. Fast Tech News.

The Bambu Lab H3C 3D printer.
Image: Bambu Lab

Gadgets

Bambu Lab's $2,499 H3C 3D Printer Swaps Between Nine Print Heads in Six Seconds

The tool-changing printer keeps nine spools in a sealed, heated chamber and can blend five base colors into near full-spectrum prints. It went on sale Tuesday.

Austin, Texas · Noah Park, Gadgets · Nov 4 2026

AUSTIN, Texas - Bambu Lab has built a printer that no longer has to push every color through a single nozzle. The H3C, which Bambu Lab introduced and put on sale on Tuesday, Nov. 3, carries nine separate print heads, each loaded with its own material and kept warm, and can switch between them in about six seconds. It costs $2,499 in the United States and 2,499 euros in Europe, according to the company’s announcement.

Screenshot: @BambulabGlobal on X, Nov. 3, 2026 Screenshot: @BambulabGlobal on X

Bambu Lab calls the system Swaptek. Each of the nine tools has its own filament path and heater, and the printer reads ahead in the print file so the next nozzle is already at temperature when it is docked. The company says each swap produces minimal waste, compared with the purging that single-nozzle printers need every time they change color. The guide tubes fold back on a retractable rack while the printer works, and every tool is calibrated and the bed is leveled automatically before each job.

The H3C’s nine print tools, each with its own filament path. Image: Bambu Lab

Video: Bambu Lab

All nine spools sit in a sealed chamber called the AMS 3H, which feeds filament to the right tool and has a drying module that can heat to 85 degrees Celsius while a print is running. The Verge’s Sean Hollister, who has been testing the printer, reported that two of the nine slots have the built-in dryers. Attaching one of Bambu Lab’s original AMS units to the first tool expands the system to 24 materials, the company said.

The AMS 3H chamber holds all nine spools. Image: Bambu Lab

The speed of the swaps is what makes color mixing practical. Bambu Lab is selling a PLA Palette of cyan, magenta, yellow and white filament plus a translucent black, and says the printer can blend those five into gradients that cover nearly the full color wheel. A separate FlexFeed extruder handles both 1.75 mm and 2.85 mm filament, so soft TPU as flexible as 75A can be printed next to rigid plastic in the same part, and nozzles from 0.2 mm to 0.8 mm can be mixed in a single print, with the fine nozzle doing the detail and a larger one building the bulk.

A full-color hummingbird printed by color mixing. Image: Bambu Lab

The rest of the machine is built for speed and heat. Bambu Lab says the motion system is 40 percent lighter than its predecessor’s, allowing accelerations of 25,000 mm/s² and moves of up to 1,400 mm/s. The chamber heats to 65 degrees Celsius, each tool reaches 350 degrees, and every nozzle is hardened steel for abrasive carbon fiber and glass fiber filaments.

A watch printed with two nozzle sizes and rigid and flexible materials. Image: Bambu Lab

On X, Bambu Lab listed three ways to buy: the $2,499 combo, a $2,589 Filament Starter Pack that adds the PLA Palette and black TPU 75A, and a $2,799 Full Combo that also includes the Bambu Station L Frame Edition stand. Hollister wrote that the printer had been easier and more reliable than Bambu Lab’s two-nozzle H2D was at launch, but that he hit early quirks, including a toolhead camera error at the start of prints and a jam when flexible filament was loaded into slot 6, which Bambu Lab’s reviewer guide warns against. He also noted that certification filings point to a smaller seven-tool model, the P3C.